Skip to content

Shellpol® 996

Carbomer 996

Very high viscosity · Short flow · 55,000–75,000 mPa·s

The highest-viscosity grade in the range. Shellpol 996 builds firm gels and thick creams at low use levels, which can reduce the amount of thickener a formulation needs.

Carbomer powder in a glass dish

Specification

Typical values. Each batch’s certificate of analysis gives the tested results.

ProductShellpol 996 carbomer
Also known asCarbomer (INCI name), carboxyvinyl polymer, cross-linked polyacrylic acid
Viscosity (0.5% in water, neutralised)55,000–75,000 mPa·s
Viscosity levelVery high
FlowShort
AppearanceWhite, fluffy powder
Neutralise withTEA, NaOH or other bases, to about pH 5–9
PackingMoisture-proof bags and drums
StorageCool, dry place, container closed
DocumentsCOA with every batch, MSDS; ISO 9001, Kosher and Halal certificate copies on request

Typical uses

  • Firm, very high-viscosity gels
  • Thick creams
  • Formulations that need viscosity at low polymer levels

How to use

Sift the powder slowly into the vortex of well-stirred water, let it hydrate fully, then add the base to thicken. Typical use levels are 0.1–1.0%. For neutraliser ratios or formulation advice, ask our technical team.

FAQs

Carbomer 996: common questions

Need something else? Ask our technical team.

What is carbomer 996 used for?

Typical uses of Shellpol 996 are firm, very high-viscosity gels, thick creams and formulations that need viscosity at low polymer levels.

What is the viscosity of carbomer 996?

55,000–75,000 mPa·s at 0.5% in water after neutralising: a very high-viscosity grade with a short flow. The certificate of analysis for each batch gives the tested value.

How do you thicken carbomer 996, and at what pH?

Sift the powder into well-stirred water and let it hydrate fully, then add a base such as TEA or NaOH. It thickens as it is neutralised, with the best viscosity at about pH 5–9. Typical use levels are 0.1–1.0%.

How is carbomer 996 different from 940 and 980?

They all have a short flow; the main difference is viscosity and typical use. 996: 55,000–75,000 mPa·s, for very high-viscosity gels and creams. 940: 40,000–60,000 mPa·s, for clear high-viscosity gels, hydroalcoholic gels, creams and lotions. 980: 40,000–60,000 mPa·s, for clear gels, skin care, topical formulations.

Compare all grades

Can I get a sample and a COA for carbomer 996?

Yes. Samples are available for most grades: tell us your application and delivery country. Every batch ships with its certificate of analysis, and we provide the MSDS.

Request a sample

Pricing, samples or documents?

Share the grade, quantity and delivery country. We respond within one business day.